# Harmonic Motion

A block of mass M, 5.4 kg, at rest on a horizontal frictionless table is attached to a rigid support by a spring constant k, 6000 N/m. A bullet of mass m, 9.5 g, and velocity of magnitude 630 m/s strikes and is embedded in the block. Assuming the compression of the spring is negligible until the bullet is embedded, determine:

B. the amplitude of the resulting simple harmonic motion

SOLUTION MISSING: Unfortunately the author of this youtube video removed their content. You may be able to find a similar problem by checking the other problems in this subject. If you want to contribute, leave a comment with the link to your solution.## Related Problems

An oscillator consists of a block of mass 0.500 kg connected to a spring. When set into oscillation with amplitude 35.0 cm, the oscillator repeates its motion every 0.500 s. Find the:

A. period

B. frequency

C. angular frequency

D. spring constant

E. maximum speed

F. magnitude of maximum force on the block from the spring

An oscillator consists of a block attached to a spring( k = 400 N/m). At some time t, the position (measured from the system's equilibrium location), velocity, and acceleration of the block are x = 0.100m, v = -13.6 m/s, and a = -123 m/s$^2$ . Calculate the

A. frequency of oscillation

B. mass of the block

C. amplitude of the motion

A block is on a horizontal surface ( a shake table ) that is moving back and forth horizontally with simple harmonic motion of frequency 2.0 Hz. The coefficient of static friction between block and surface is 0.50. How great can the amplitude of the simple harmonic motion be if the block is not to slip along the surface?

Two blocks (m = 1.8 kg and M = 10 kg) and a spring ( k = 200 N/m ) are arranged on a horizontal frictionless surface. The coefficient of static friction between the two blocks is 0.40. What amplitude of simple harmonic motion of the spring-block system puts the smaller block on the verge of slipping over the larger block?